T200/2
25
9. Trouble shooting - remedies
Fault
Cause
Remedy
The strap is not transported
into the channel system and
does not reach the strap stop
switch.
The strap has broken off the
channel.
Perform a complete touch
control cycle of the cam gear
until the counter plate and
the strap channel are closed.
Re-start automatic mode.
The strap is not in the
feeding unit.
Re-insert strap. Page 19.
The friction welding unit is
not at zero position.
Touch control of the cam
gear until the counter plate
and the strap channel are
closed.
Strap jam in the feeding unit.
Remove cover plate of the
feeding unit and eliminate the
jam.
The strap does not meet
requirements (strength,
sabre).
Use strap for automatic units.
Mismatch at the channel
transitions (joint edges).
Align transitions.
The transport wheel does not
feed the strap.
Increase the feed to the
transport wheel.
B 010 - GB 22/10
B 010 - GB 22/10
