T200/2
17
7. Operation / settings
7.1. Description of components
The
T200/2
consists of the following components:
Tensioning and transport system:
The transport system feeds the strap through the strap guide channel around the
package and back to the strapping head. There the strap end activates the strap
stop switch. During the strap retraction the strap is tightened around the package
and tensioned according to the preset tension.
Sealing unit:
The sealing unit is controlled by the cam gear. It clamps the strap ends, cuts the
strap and forms the friction weld joint.
Friction welding unit:
The sealing motor generates the movement of the oscillator which provides the
required heat for joint forming. During the friction movement the straps are
pressed together and thus heat-sealed.
Strap guides:
The strap guides are the connection between the strapping head and the strap
guide channel which leads the strap around the package.
Attention!
Prior to any adjustments or settings the strapping head must
be put out of operation and disconnected from the power
supply.
B 010 - GB 22/10
