Titan SF08N5 Скачать руководство пользователя страница 2

GUARANTEE

This 

product carries a Screwfix Direct Ltd guarantee of 12 months. If your product 

develops a fault within this period, you should,in the first instance contact Screwfix 

Direct Ltd on Freephone 0500 41 41 41.  If the fault occurs within the first 12 months, 

you may return the goods for a full refund or we will repair or replace the goods if 

you prefer. When repair is not practical or identical goods are not available, alternative 

goods of similar specification and quality will usually be provided but, failing this, you 

will be offered a partial or full refund depending on the time period since purchase. 

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

- Repairs attempted by anyone, unless authorised by Screwfix Direct Ltd.

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

For further technical advice, spare parts or repair service (outside of guarantee) please 

contact the customer helpline number on 0845 607 6380.

Congratulations on your purchase of a 

 power tool from Screwfix Direct 

Ltd. We want you to continue getting the best performance from it so this 

handbook includes information on safety, handling and care. Please retain this 

handbook in case you need to refer to any of the information in the future.

Your 

power tool comes with a 12-month guarantee,so should it develop 

a fault within this period contact Screwfix Direct Ltd on Freephone 0500 41 

41 41.  

Содержание SF08N5

















Отзывы: