Titan Pro-3D Cascade, Руководство по эксплуатации

Страница: 19 / 20

35 34
1 2
3 4
Method of Usage Method of Usage
Zipper
VIII . Instructions for Removal and Use of Head Cushion and Backrest
·
The use of the head cushion can reduce the intensity of kneading massage on
the neck and shoulders. You can decide whether to use the head cushion
according to your own needs (the head cushion is recommended). The backrest
and the back cushion are connected by a zipper (1). The head cushion and the
backrest are connected by a zipper (2).
1 2
Zipper
1.Enter the smart device main menu. Open "Settings" and select the "Bluetooth"
option. Open "Bluetooth", and Bluetooth will automatically "Search for a New
Bluetooth Device".
2.The smart device will search for the corresponding Bluetooth model (e.g. IMCM-
XXXX). Click the "Match" button. If you are asked whether to match with the
device, you just select "Match" to complete matching.
3.Turn on "Music Player" in the smart device and select the song to play.
VI.Operation Instructions for Bluetooth Speaker Play
VII.lnstallation Instructions for Legrest
V.Turn off the power and stop massage
· If the power button is pressed during massage, it will stop all the massage
functions immediately, and the backrest, the legrest and massage chair
manipulators will go back to the default positions. When the preset massage time
is up, all the massage functions will be off. The backrest and the legrest will not
go back to the default positions.
· Shut off the power supply of this product, as shown in the attached figure (Power
Shut-off Diagram of the Product).
POW
ER I
NPU
T
POW
ER I
NPU
T
FUSE: T5AL 250V
ON/O
FF
FUSE: T5AL 250V
ON/O
FF
Schematic diagram of the whole machine power turning off.
Schematic diagram of unplugging the whole machine wiring.
Schematic diagram of unplugging the power plug.
·
After connecting the calf and the air tube on the massage chair with the wire
harness, untie the fixed pipeline belt and insert the connecting part into the seat
frame (Figure 1).
·
Place the round tubes on the left and right sides of the calf on the calf frame seat
(Figure 2).
·
Turn over the calf fixing cover to cover the round tubes on both sides of the calf
(Figure 3).
·
Fasten the calf on the massage chair with 2 M4 screws (1 on the left and 1 on the
right). Check whether or not there is any abnormality in the up-and-down turning
and whether the pipeline is folded. The calf installation is now complete
(Figure 4).