Titan PR 33, Инструкция по эксплуатации

Страница: 21 / 66

PR33/SPZ/HR32/HHA
21 / 66
2. General
These operating instructions are meant to facilitate becoming familiar with the units and their
intended use. These operating instructions include important notes on how the units can be
exploited safely, in a technically competent way and economically. Meeting instructions helps
avoid risks, reduce repairs and downtimes and increases the reliability and life of the units.
These operating instructions must be available at the location of the units. They must be read
and used by all persons working with the units. Those works especially include operation,
troubleshooting and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents
applicable in the user’s country and at the place of location the acknowledged rules for safety-
related and technically competent working have to be observed.
Explanatory notes on the warning and instruction symbols:
Caution!
Is used in case of risks of life and death
Attention!
Is used in case of risks which might cause
damage to objects.
Note!
Is used for general indications and indications whose
disregard might cause disruption in the operational process.
2.1. Information on environmental protection
No substances detrimental to health, physical or chemical
substances are used for the manufacture of the units. Waste
disposal is subject to the applicable legal regulations.
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2011 All rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H363 EU 18/10