Titan MTX-Router-Titan, Руководство пользователя

Страница: 93 / 200

Matrix Electrónica – MTX ‐ Router ‐ Titan User Manual ‐ Rel3.00.3.09
Page 93
http://www.mtxm2m.com
Subject to changes without prior notice
Deactivate the Titan device’s internal Relay 1
EXAMPLE 10:
If [register 15 of the Modbus device with address 1] is greater than 10
[Activate the Titan device’s internal Relay 1] AND AFTER [pause for 5 seconds]
AND AFTER [Deactivate the Titan device’s internal Relay 1]
EXAMPLE 11:
If [register 15 of the Modbus device with address 1] is greater than 10
CONTINUOUSLY [Activate the Titan device’s internal Relay 1] AND AFTER [pause
for 5 seconds] AND AFTER [Deactivate the Titan device’s Relay 1]
The difference between example 10 and 11 lies in the @ symbol. This indicates that the action
is continuously executed. This means that in example 10, ACTION1 is executed just once
when the IF condition is true, and will not be executed again until ACTION1 changes or
ACTION2 is executed. In example 11 however, ACTION1 is executed continuously whenever
the IF condition is true; i.e. the relay is changing all the time.