![background image](http://html.mh-extra.com/html/titan/mtx-router-titan/mtx-router-titan_user-manual_1119693070.webp)
Matrix
Electrónica
–
MTX
‐
Router
‐
Titan
User
Manual
‐
Rel3.00.3.09
Page
70
http://www.mtxm2m.com
Subject
to
changes
without
prior
notice
4.7.10- Other >> Remote console.
If at any time you need to carry out a special operation on the router via a Telnet-type connection, you
can do so using this section. With this special connection you can send an SMS, change the router’s
configuration, change a relay, etc. by sending AT commands via a Telnet-type connection. Look at
section 5 of this manual for a list of AT commands available.
Enabled
: activate this option if you want to use this special connection.
TCP Port
: router’s listening TCP port where the connection should be made.
Login
: username that will be required after a connection is made.
Password
: password that will be required after a connection is made.
Additional Notes.
- Once the configuration is finished, click “SAVE CONFIG” to save the changes. Remember
that the router should be restarted for the changes to take effect.
- The remote access to the console can be carried out on a local level (Ethernet or Wi-Fi)
or remotely via a 2G/3G connection.