Titan Advantage Series GPX33 Скачать руководство пользователя страница 3

English

 

  7.  Do not kink or over-bend the hose. Airless hose can 

develop leaks from wear, kinking and abuse.  A leak 

can inject material into the skin.  

  8.  Do not expose the hose to temperatures or pressures in 

excess of those specified by manufacturer.

  9.  Do not use the hose as a strength member to pull or lift 

the equipment.

 10.  Use lowest possible pressure to flush equipment.

 11.  Follow all appropriate local, state and national codes 

governing ventilation, fire prevention and operation.

 12.  The United States Government Safety Standards have 

been adopted under the Occupational Safety and 

Health Act (OSHA).  These standards, particularly part 

1910 of the General Standards and part 1926 of the 

Construction Standards should be consulted.

 13.  Before each use, check all hoses for cuts, leaks, 

abrasion or bulging of cover.  Check for damage or 

movement of couplings.  Immediately replace hose if 

any of those conditions exist. Never repair a paint hose.  

Replace with a conductive high-pressure hose.

 14.  Do not spray outdoors on windy days.

 15.  Always unplug cord from outlet before working on 

equipment (electric models only).

Gasoline Engine Safety

The engine exhaust from this unit contains 

chemicals known to the State of California to 

cause cancer, birth defects, or other 

reproductive harm.

  •  Gas engines are designed to give safe and dependable 

service if operated according to instructions.  Read 

and understand the engine Owner’s Manual before 

operating the engine.  Failure to do so could result in 

personal injury or equipment damage.

  •  To prevent fire hazards and to provide adequate 

ventilation, keep the engine at least 1 meter (3 feet) 

away from buildings and other equipment during 

operation.  Do not place flammable objects close to the 

engine.

  •  To prevent fire or explosion hazard, avoid spraying or 

splashing any flammable solvent near the engine.

  •  Children and pets must be kept away from the area of 

operation due to a possibility of burns from hot engine 

components or injury from any equipment the engine 

may be used to operate. 

  •  Know how to stop the engine quickly, and understand 

the operation of all controls.  Never permit anyone to 

operate the engine without proper instructions. 

  •  Gasoline is extremely flammable and is explosive under 

certain conditions. 

  •  Refuel in a well-ventilated area with the engine stopped.  

Do not smoke or allow flames or sparks in the refueling 

area or where gasoline is stored. 

  •  Do not overfill the fuel tank.  After refueling, make 

sure the tank cap is closed properly and securely. 

  •  Be careful not to spill fuel when refueling.  Fuel 

vapor or spilled fuel may ignite.  If any fuel is 

spilled, make sure the area is dry before starting 

the engine. 

  •  Never run the engine in an enclosed or confined 

area.  Exhaust contains poisonous carbon 

monoxide gas; exposure may cause loss of 

consciousness and may lead to death. 

  •  The muffler becomes very hot during operation 

and remains hot for a while after stopping the 

engine.  Be careful not to touch the muffler while 

it is hot.  To avoid severe burns or fire hazards, let 

the engine cool before transporting it or storing it 

indoors. 

  •  Never ship/transport unit with gasoline in the tank.

  •  Never dispose of the unit when it is filled with oil 

or gas.  Follow all appropriate local, state, and 

national regulations when disposing of the unit.    

Safety Shut-Off Switch

The safety shut-off switch is pre-set by the factory to 

shut down the sprayer to prevent over-pressurization.  

Do not attempt to adjust or tamper with the safety shut-

off switch.  Contact an authorized service center if this 

setting requires adjustment.

 NOTE:  The safety shut-off switch should be set 

to shut down the sprayer between 3200 – 

3300 PSI.

Fueling (gas engine)

Gasoline is extremely flammable and is 

explosive under certain conditions.

  •  ALWAYS turn the engine off before refueling.

  •  Refuel in a well-ventilated area.

  •  Do not smoke or allow flames or sparks in the 

refueling area or where gasoline is stored.

  •  Do not overfill the fuel tank.  After refueling, make 

sure the tank cap is closed properly and securely.

  •  Be careful not to spill fuel when refueling.  Spilled 

fuel or fuel vapor may ignite.  If any fuel is spilled, 

make sure the area is dry before starting the 

engine.

  •  Avoid repeated or prolonged contact with skin or 

breathing of vapor. 

  •  Keep out of the reach of children.

Fuel Specifications

  •  Use automotive gasoline that has a pump octane 

number of 86 or higher, or that has a research 

octane number of 91 or higher.  Use of a lower 

octane gasoline can cause persistent “pinging” 

or heavy “spark knock” (a metallic rapping noise) 

which, if severe, can lead to engine damage. 

 NOTE:  If “spark knock” or “pinging” occurs 

at a steady engine speed under normal 

load, change brands of gasoline.  If 

spark knock or pinging persists, consult 

an authorized dealer of the engine 

manufacturer.  Failure to do so is 

considered misuse, and damage caused 

by misuse is not covered by the engine 

manufacturer’s limited warranty. 

 NOTE:  Occasionally you may experience light 

spark knock while operating under heavy 

loads.  This is no cause for concern, it 

simply means your engine is operating 

efficiently. 

  •  Unleaded fuel produces fewer engine and spark 

plug deposits and extends the life of the exhaust 

system components. 

  •  Never use stale or contaminated gasoline or an oil/

gasoline mixture.  Avoid getting dirt, dust, or water 

in the fuel tank.

Gasolines Containing Alcohol

If you decide to use a gasoline containing alcohol 

(gasohol), be sure its octane rating is at least as high as 

that recommended by the engine manufacturer.  There 

are two types of “gasohol”: one containing ethanol, and 

the other containing methanol.  Do not use gasohol that 

contains more than 10% ethanol.  Do not use gasoline 

containing methanol (methyl or wood alcohol) that does 

not also contain co-solvents and corrosion inhibitors for 

methanol.  Never use gasoline containing more than 

5% methanol, even if it has co-solvents and corrosion 

inhibitors. 

 NOTE:  Fuel system damage or engine per-

formance problems resulting from the 

use of fuels that contain alcohol is not 

covered under the warranty.  The engine 

manufacturer cannot endorse the use of 

fuels containing methanol since evidence 

of their suitability is incomplete at this time.

 

  Before buying gasoline from an unfamiliar 

station, try to find out if the gasoline 

contains alcohol.  If it does, confirm the 

type and percentage of alcohol used.  If 

you notice any undesirable operating 

characteristics while using a gasoline that 

contains alcohol, or one that you think 

contains alcohol, switch to a gasoline that 

you know does not contain alcohol. 

Содержание Advantage Series GPX33






























Отзывы: