Titan 759-135, Руководство пользователя

Страница: 3 / 12

© Titan Tool Inc. All rights reserved. 3
Important Safety Information
·
Read all safety information before
operating the equipment. Save theSe InStRuctIonS.
6. Do not kink or over-bend the hose. Airless hose can develop
leaks from wear, kinking and abuse. A leak can inject
material into the skin.
7. Do not expose the hose to temperatures or pressures in
excess of those specified by manufacturer.
8. Do not use the hose as a strength member to pull or lift the
equipment.
9. Use lowest possible pressure to flush equipment.
10. Follow all appropriate local, state and national codes
governing ventilation, fire prevention and operation.
11. The United States Government Safety Standards have
been adopted under the Occupational Safety and Health
Act (OSHA). These standards, particularly part 1910 of
the General Standards and part 1926 of the Construction
Standards should be consulted.
12. Before each use, check all hoses for cuts, leaks, abrasion
or bulging of cover. Check for damage or movement
of couplings. Immediately replace hose if any of those
conditions exist. Never repair a paint hose. Replace with a
conductive high-pressure hose.
13. Do not spray outdoors on windy days.
14. Always unplug cord from outlet before working on equipment
(electric models only).
Gasoline Engine Safety
The engine exhaust from this unit contains chemicals
known to the State of California to cause cancer, birth
defects, or other reproductive harm.
1. Gas engines are designed to give safe and dependable
service if operated according to instructions. Read and
understand the engine Owner’s Manual before operating the
engine. Failure to do so could result in personal injury or
equipment damage.
2. To prevent fire hazards and to provide adequate ventilation,
keep the engine at least 1 meter (3 feet) away from buildings
and other equipment during operation. Do not place
flammable objects close to the engine.
3. Children and pets must be kept away from the area of
operation due to a possibility of burns from hot engine
components or injury from any equipment the engine may be
used to operate.
4. Know how to stop the engine quickly, and understand the
operation of all controls. Never permit anyone to operate the
engine without proper instructions.
5. Gasoline is extremely flammable and is explosive under
certain conditions.
6. Refuel in a well-ventilated area with the engine stopped. Do
not smoke or allow flames or sparks in the refueling area or
where gasoline is stored.
7. Do not overfill the fuel tank. After refueling, make sure the
tank cap is closed properly and securely.
8. Be careful not to spill fuel when refueling. Fuel vapor or
spilled fuel may ignite. If any fuel is spilled, make sure the
area is dry before starting the engine.
9. Never run the engine in an enclosed or confined area.
Exhaust contains poisonous carbon monoxide gas; exposure
may cause loss of consciousness and may lead to death.
10. The muffler becomes very hot during operation and remains
hot for a while after stopping the engine. Be careful not to
touch the muffler while it is hot. To avoid severe burns or fire
hazards, let the engine cool before transporting it or storing it
indoors.
11. Never ship/transport unit with gasoline in the tank.
DO NOT use this equipment to spray water or acid.
IMPORTANT: Do not lift by cart handle when loading or
unloading.
Table of Contents
Safety Precautions ................................................................ 2-3
Introduction ............................................................................... 4
Assembly................................................................................... 4
Installing the Drive Assembly .............................................. 4
Installing the Valve and Speed Control ............................... 4
Installing the Switch Assembly ............................................ 4
Installing the Hoses ............................................................. 5
Connecting the Wires .......................................................... 6
Electrical Schematic ............................................................ 6
Operation ................................................................................... 6
Initial Startup ....................................................................... 6
Normal Startup .................................................................... 7
Maintenance .............................................................................. 7
Parts List ................................................................................... 8
Drive Assembly ................................................................... 8
Switch Assembly ................................................................. 9
Hydraulic System ................................................................ 9
Limited Warranty .................................................................... 12
Introduction
The PowrDrive is a self-propulsion accessory for PowrLiner
6900/6950 and PowrLiner 8900/8950 line stripers.
This PowrDrive offers the following features and benefits:
• Variable speed, hydraulically-powered system utilizes
reserve hydraulic horsepower from the PowrLiner’s on-
board hydraulic system.
• Electric FORWARD/REVERSE rocker switch is spring-
loaded to neutral for easy and safe operation.
• Dual rear-wheel drive provides for easier striping on hilly,
sloped, or uneven surfaces.
• Provides increased productivity by allowing faster striping
speeds.
• Speed is easily adjusted to suit the application or
operator’s preference.
• All controls are in easy reach of the operator.
• Drive mechanism is easily disengaged for manual
operation.
• Auto bypass allows operator to push and pull the
striper with the PowrDrive engaged for maximum
maneuverability.
• PowrDrive installs easily in about one hour without special
tools or drilling holes.
Drive Lever
(engaged position)
Speed Control
Solenoid Valve
FORWARD/REVERSE
Switch
Turnbuckle
Drive Gear