10
In
more
detail...
EN
Filling the water tank
WARNING!
Switch the appliance off and disconnect it from the socket outlet
before filling the water tank.
NOTE:
Use the steam trigger on the steam gun and direct the jet into a
suitable container to bleed out the remaining pressure from the water tank.
NOTE:
Always let the appliance cool down and then loosen the water tank
cap slowly to let the pressure and hot steam escape.
1. Turn the water tank cap (3) anti-clockwise to remove it (Fig. 1).
Fig. 1
2. Position the filling funnel (17) on the water tank inlet (Fig. 2).
3. Pour up approx. 1000 ml of water slowly using the measuring cup (18) (Fig. 3).
Fig. 2
Fig. 3
4. Refit the water tank cap (3) and turn it clockwise to tighten it in place (Fig. 4).
Fig. 4
Before you start
