
11
5.
If the machine becomes clogged, immediately turn off the engine before
clearing the debris. Keep the engine clear of debris and other accumulations to
prevent damage to engine or possible fire.
6.
Never rest items on the cover of hopper in case they may fall into the machine.
7.
To move the machine, firmly hold the handles with both hands, step on the Axle
on the rear wheel with one foot, lift the front of machine, pay attention to centre
of gravity of machine, walk slowly forward, backward or turn around as required.
8.
Before operating the machine, please check the direction of the wind to avoid
working downwind of exhaust.
9.
Keep all guards and deflectors in place and in good working condition.
10.
The exhaust and engine become hot and can cause a burn. Do not touch.
11.
Turn off machine before transporting the machine.
12.
Do not tilt the machine while the engine is running.
MAINTENANCE & STORAGE
1. When the machine needs servicing, inspection, or storage, or to replace a part,
turn off the engine, make sure all the moving parts are completely stopped and
allow the machine to cool before making any inspections, adjustment etc.
2. Store the machine where fuel vapours will not reach an open flame or spark. If
the machine is stored for a long time, drain the fuel out of the machine. Make
sure the machine is cool before storing.
3. When the cutting blades need servicing, remove them manually when the
machine is stopped
and the spark plug removed from the engine for safety.
Branch chipping
1. Long branches etc are fed into the side chipping tube for chipping by the rotating
blade.
2. Some side shoots and branches may have to be trimmed from the main stalk
before chipping.
3. Shorts stubs of branches may be pushed through the chipper section with the
next branch,
never
use your hand.
4. The last branch is pushed inside the tube using a tool like a wooden stick.
Never
use your hand or a metal object.
5.
Never
push the small branches by hand, use a wooden stick instead.
Содержание 15 HP
Страница 18: ...18 PARTS DIAGRAM ...