Titan Lifts MD-1250-XL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 12

OPERATION & MAINTENANCE
1. All moving parts have been lubricated at the factory and should be re-lubricated before the first use
and at least once every six months to prevent damage.
2. Do not use this product if worn or damaged. Examine dolly for structural cracks, bends, or other signs
of damage prior to each use to ensure safe proper working condition.
3. Keep the dolly clean, dry, and well maintained to extend longevity of the product.
4. When not in use, the dolly must be stored in a dry location.
ASSEMBLY
1. Attach the Caster Assembly (2) to Frame Assembly (1) and Side Kickstand Tray (17) by using Hex Bolt
M6 (3), Washers (4), Lock Washers (5) and Nut M6 (6). Secure firmly.
2. Attach the Connecting Plate (7) to the two side of Stopping Ramp A (9). Then attach the Connecting
Plate (7) to the Frame Assembly (1) by using the Cheese Head Bolt (8), Washers (4), Lock Washers (5)
and Nut M6 (6). Repeat for Stopping Ramp B (18).
3. Connect the two Frame Assemblies (1) with the Connecting Pipes (16), then secure them by using Bolt
M8 (11), Washer (12), Lock Washer (13) and Nut M8 (14).
4. Lastly, fit the Side Kickstand Tray (17) to the Frame Assembly (1) by using Bolt M8 (15) Washer (12),
Lock Washer (13) and Nut M8 (14). Attach two Stop Pins (10) to the slots on each end of the Frame
Assembly (1), Tighten all connecting points.
SAFETY PRECAUTIONS
1. Load should not exceed rated capacity for this dolly – 1250 lbs
2. Only trained people should operate the dolly.
3. Indoor use recommended.
4.
Do not make any modifications to the dolly.
5. Keep hands, tools, and other extremities from any moving parts.
6.
Maintain a safe working environment. The work area should be clean, dry, clutter free, and sufficiently
lit.
7. Wear proper safety attire. Do not wear loose fitting clothing while operating. Long hair, sleeves and
other loose articles should be secured.
8. Keep children and bystanders away from work area. Do not let children operate or play on dolly.
9.
Do not use if under the influence of drugs or alcohol. Operator must be alert at all times.
10. Never use the dolly with someone on it.
11. This dolly is designed for carrying motorcycles. Do not use this product for an application for which it
was not designated. Misuse can lead to personal injury and/or property damage.
INSTRUCTIONS
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND
SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND / OR PROPERTY
DAMAGE MAY OCCUR IF INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
UNPACKING AND SET-UP *REFER TO PARTS LIST FIG. 1
1. Carefully unpack the dolly making sure that all of the parts have been included.
2. Make sure to use the dolly on a clean, smooth solid surface that is capable of sustaining the load.
3. Place both stopping ramps in the down position prior to loading.