Titan Electronics NCOM SERIAL 4XX Series, Руководство пользователя

Страница: 77 / 94

76
8.7.3.2 Changing Network Operation Mode
To change the network operation mode of a virtual serial port, click “Port1” under
“COM Port Status”. Under “Network Settings”, you may choose “Driver Mode”,
“RFC2217 - Server”, “RFC2217 - Client”, “TCP Raw - Server”, “TCP Raw - Client”, “Pair
Connection Master Mode”, “Pair Connection Slave Mode” and “UDP” depending on
your application.
After selecting an operation mode, click “Update” to set your NCOM-413 into the
proper operation mode.
After clicking “Update” to set your NCOM-413’s operation mode, a message will
indicate “Update Success!!”.
Click on “OK” to finish change operation mode procedure.