15
STEP 3: INSTALLING WHEEL TIRE ASSEMBLY AND FITTINGS
Remove the packaging of wheel tire assembly and fittings.
Remove item4, item5 and one piece of item3 from wheel tire assembly. Insert the pivot shaft of
wheel tire assembly into the bushing of the gauge wheel mainframe weldment and reinstall item4
to item5.
Secure with item3.
Item 1
–
Main body of the rotary cutter
Item 2
–
Wheel tire assembly
–
(1 set)
Item 3
–
Spacer H=6 (2pcs)
Item 4
–
Cap shaft mount (1pcs)
Item 5
–
Safety lock
pin φ8x45
(1 pcs)
Figure 1-10:
Installing Wheel Tire Assembly and Fittings
WARNING
SAE EP 90W Gear oil must be your first use. Overfilling or under filling gear oil may cause gearbox seizing
or damage.
4. GEAR OIL FILLING
Check oil level in gearbox by removing the cap located on the side of the gearbox. Oil should be
level with middle side of plug hole. Add necessary oil by removing top cap and side plug. Add oil until
it flows from middle side plug hole.
Item 1
–
Cap for inlet gearbox oil
Item 2
–
gearbox
Item 3
–
Plug for gearbox oil level
Figure 1-11
: Gearbox construction
