Titan Attachments 191539, Руководство оператора

Страница: 16 / 34

16
SECTION 4: ADJUSTMENTS
Belt Adjustment
1.
Tool Required
½” Ratchet wrench with 13mm, 19mm sleeves
22-24 Spanner
2. Torque Application
Refer to bolt torque in Section 8 Appendix.
a. Remove mower from the loader.
b. Disconnect item 1 from the mower main body.
c. Remove item 3, item 8, item 9.
d. Loosen item 11 and then tighten the inner item 10 to adjust belt tension.
e. Tighten the outer item10 to lock the gearbox position.
f. Retighten item 11.
g. Reinstall item 3, item 8, item 9 and retighten item 4, item7.
h. Reconnect item 1 with the mower main body.
Figure 4-1 Belt Adjustment
Item1 – chain & rope fittings 2pcs
Item2 – chains 2pcs
Item3 – pulley cover L 1pcs
Item4 – Bolt M8x20 2pcs
Item5 – spring washer 8 6pcs
Item6 – Large plain washer 8 6pcs
Item7 – Bolt M8x25 4pcs
Item8 – Motor cover 1pcs
Item9 – Pulley cover R 1pcs
Item10 – Hex. Nut M16 2pcs
Item11 – Bolt M12x40 4pcs
Item12 – Locknut M12 4pcs
Item13 – Large plain washer 12 4pcs
Item14 – Rubber plug φ91.3