Size
А4
ROAD BLOCKING SYSTEMS
Installation and Operation Manual
Revision 1.1 01.2022
Page
-
4
-
MECHANICAL TIRE-KILLER
Size
А4
ROAD BLOCKING SYSTEMS
Installation and Operation Manual
Revision 1.1 01.2022
Page
-
4
-
MECHANICAL TIRE-KILLER
Office and Production site: Tel.: +380 (44) 291-21-11
14 Promyslova str., 02088, Kyiv, Ukraine, Fax: +380 (44) 291-21-02
E-mail: [email protected] www.tiso.global
1.1 Instructions to installer:
1. The equipment installation instructions shall be complied with for safety reasons.
2. The product shall be installed according to the code of practice in compliance with safety
regulations for installation.
3. Packing materials are subject to disposal according to the applicable standards.
4. The road blocker installation procedure shall be ishall be strictly observed.
џ
It is forbidden to modify the equipment configuration and to use materials
and components being outside the scope of delivery and not specified by
this Manual.
џ
It is forbidden to install equipment during thunderstorm, heavy rain or
snowfall, in explosive environment and obscured conditions. Installation
area shall be prepared according to the applicable standards.
џ
The road blocker shall be installed and precommissioned by qualified
professionals.
5. When faults or defects are detected, the Supplier's service department shall be referred
to;
6. The installer shall provide the user with the required information on operation of the
system in manual mode in case of emergency
7. The manufacturer shall not be liable for the equipment operation in the following events:
• noncompliance with installation procedure;
• use of nonstandard materials and components;
• performance of work by unqualified personnel.
8. The manufacturer shall not be liable for compliance with safety measures during
installation of the equipment by the personnel outside the Company's service department.
