Tisira TFGC969E, Руководство пользователя

Страница: 18 / 28

INSTALLATION
Installing the anti-tilting chain
The cooker is supplied with an anti-tilting
chain to prevent the appliance from tilting
forward and accidentally damaging the gas
pipe. The anti-tilting chain should be fitted
as follows:
1. Take the expansion with hook and make
an adequate hole in the wall behind, at
the same height as the chain fixing area.
2. Insert the plug into the hole and then
screw in the hook until it is firmly fixed
to the wall.
3. Fix the chain to the hook.
4. Adjust to level of the cooker inserting
the feet provided.
In situations where the cooker is installed
between two cabinets:
1. Drill a 16mm hole in each cabinet, at
the same height as the chain.
2. Feed the chain through the left and right
holes respectively.
3. Move cooker to desired position.
4. Tighten and fix chains to back-side of
cabinet.
Combustible Surfaces
Any adjoining wall surface situated within
200mm from the edge of any hob burner
must be a suitable non-combustible
material for a height of 150mm for the
entire length of the hob.
Any combustible construction above the
hotplate must be at least 600mm above the
top of the burner and no construction shall
be within 450mm above the top of the
burner. Zero clearance is permitted on side
and rear adjoining surfaces below the hob.
pg 18