pg
9
tisira |
www.tisira.com
Before locating the fixing brackets the unit should be placed on a stable, smooth surface
(use the packaging). Do not apply force onto the controls protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture)
after installation.
NOTICE //
Adjust the bracket position to suit for different work surface’s thickness.
CAUTIONS //
The ceramic cooker hob must be installed by
qualified personnel or technicians. We have
professionals at your service. Please never
conduct the operation by yourself.
The ceramic cooker hob shall not be
mounted to cooling equipment, dishwashers
and rotary dryers.
The ceramic cooker hob shall be installed
such that better heat radiation can be
ensured to enhance its reliability.
The wall and induced heating zone above the work surface shall withstand heat.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner is not to be used.
This ceramic can be connected only to a supply with system impedance no more than
0.427 ohm. In case necessary, please consult your supply authority for system impedance
information.
INSTALLATION
