Tiptop Audio Z300 MKII Smart VCO, Руководство пользователя

Страница: 12 / 20

External Input.
This is a direct input into the pulse counter in
the Z3000mkII. Feed a falling sawtooth wave from any
other VCO into this input to adjust, synthesize and
monitor the pitch using all of the features of the
Z3000mkII's three mode options.
The EXT IN is designed to work with a 10Vpp falling
sawtooth wave, though other waveforms can be used
if the sawtooth waveform is not providing a stable
reading. As long as the signal does not exceed 10Vpp,
a signal from most VCOs can be used.
MIN MAX
MIN MAX
LOW HIGH
SYNC HSM
1V/Oct 1V/Oct
Linear FM
INPUT
PWM FM 1
LOW HIGH
Hz
Oct
FM 2
INPUT
CV IN INPUT
CV IN CV OUT
INPUT INPUT
+
+ +
+
EXT IN
FREQUENCY/NOTE/OCTAVE
Tipt p
A u d i o
Z 3 0 0 0
Smart VC-­Oscillator FREQUENCY
FINE TUNE
PULSE WIDTH
PWM
FM
Sawtooth
VCO
SYNC HSM
1V/Oct EXT-­IN
Linear FM
INPUT
PWM FM 1
FM 2
CV IN INPUT
CV IN INPUT
INPUT INPUT
+
+ +
+
Tipt p
A u d i o
Z 3 0 0 0
Hz
Oct
FREQUENCY/NOTE/OCTAVE
FM
PWM
PULSE WIDTH
FINE TUNE
MAX MIN
MIN MAX
LOW HIGH
LOW
SHAPER
WAVE
FREQUENCY Smart VC-­Oscillator
HIGH