TIPTEL Ergophone 6060, Руководство по эксплуатации

Страница: 11 / 64

Inital use
11
Remove the case cover on the back of the device to insert the SIM
card(s), the battery and a memory card. Press the case cover un-
derneath the emergency button and slide it downward until it can
be removed (Fig. 1).
Push the SIM card(s) into the holder (Fig. 2). The first SIM is in-
serted into the upper holder (facing the battery lid) and the second
SIM into the lower holder (facing the circuit board). If you only want
to use one SIM, insert it into the slot for the first SIM. The contacts
for the SIM card(s) must be facing the circuit board (downwards).
The notch in the SIM card must be visible after insertion and be
facing the SD card.
Carefully install the SD card (if available) into the card holder in the
middle of the device (Fig. 3). The contacts of the SD card must be
facing the circuit board (downwards).
The battery is inserted next (only possible in the correct position -
Fig. 4).
Then replace the case cover and slide it towards the SOS button
until it clicks into place. Careful press the case cover where the
SIM card(s) is/are so that it clicks into place correctly.
Note: The phone can be used without a memory card but this
restricts memory capacity. The use of a memory card is
recommended if you want to take a lot of photos or rec-
ord many voice messages. The device supports Micro
SD memory card capacities up to 8 GB.