TIPTEL easyBASE 28 plus, Руководство по эксплуатации

Страница: 36 / 52

10
3 Programming mode
Function Parameter Line no. Mob. no.
code
3.2.1 Call assignment of the handsets
Call assignment 11 1...2 0...9 #
For each line, incoming calls can be assigned to a maximum of 4 call
destinations. Call destinations are the handsets 1 to 8 and hunt group
call 9. With call destinations 1-8, the caller's telephone number is
displayed via CLIP. Call destination 9 signals all registered handsets
but without CLIP display, call waiting will not be signalled.
Programming example:
Calls to line 1 should be signalled on handsets 1, 3 and 6 with CLIP
display.
Calls to line 2 should be signalled on handsets 3, 4 and 5 with CLIP
display and without CLIP display on other handsets.
Procedure:
1) Activate programming mode
2) Enter
11 1 1 3 6 #
3) Enter
11 2 3 4 5 9 #
4) Close programming mode
Factory setting: 1, 2, 3, 9
Function Parameter Mob. no. Input
code
3.2.2 Line assignment for outgoing calls
Regardless of the setting for this programming option, the access code
can be used to select specific lines.
Line assignment 12 1...8 0 #
When making an external call, any free telephone line is used.
Line assignment 12 1...8 1 #
When making an external call, only telephone line 1 is used to connect
the call. If this line is occupied, a busy tone will be heard.