Message transfer
61
Message transfer
For message transfer the answering machine dials the saved call numbers consec-
utively after each new incoming message. If the subscriber called picks up he will
hear the following outgoing message:
"Automatic call, ..x.. incoming messages, please collect remotely, I repeat …" or if
you have entered your own call number as identification "automatic call from sub-
scriber (own call number), ..x.. incoming messages, please collect remotely, I re-
peat".
It is possible to start remote control for the recorded message(s) during the mes-
sage. Proceed as described in "Carry out remote control" (*Code#). If you do not
access the messages remotely the device dials the next call number after a waiting
period (5 - 180 seconds). If no remote control is carried out during the repeat time
(5 – 60 minutes) the device dials the complete call number sequence again as a
reminder. If there is no remote control your tiptel 540 SD makes no, one or two rep-
etitions depending on the setting you have chosen.
Setting options for message transfer
Waiting period
...................... 5 to 180 sec. This is the time from hanging up to
dialling the next call number.
Repeat period
....................... 5 to 60 minutes. This is the time that passes before
all call numbers are called again.
Repetitions
............................ 1, 2 or no repetitions
Playbacks
.............................. 1 – 8 times. You can set here how often to replay
the forwarding message.
1. Call number
....................... >>
2. Call number
....................... >>
3. Call number
....................... >>
4. Call number
....................... >>
