Remote access
42
Remote access
You can access your tiptel 540 SD remotely from anywhere in the world using the
keypad on a tone-enabled (DTMF) telephone. You need a personal remote access
code to access the phone remotely. You can set your personal remote access code
as described in "Settings" (Page 82).
Remote access
Call tiptel 540 SD.
You hear the OGM.
Start entry with the star button.
The OGM stops.
Enter the remote access code via
the telephone keypad. If you make a
mistake delete entry using the star
key and start again.
A voice message confirms recognition of
each digit.
To confirm the entry press the hash
button.
If the correct code is detected your tiptel
540 SD notifies you via a voice message.
If the code is wrong the device breaks
the connection.
Start the desired function by enter-
ing the corresponding number.
If there are new messages playback
starts automatically.
Press digit 8 to end a function.
The current function ends.
End remote access by pressing star
and hash in succession.
180 seconds after the last button entry your tiptel 540 SD asks whether you
are still on the line with the "Please quit" voice message. You must respond to
this quit request within 8 seconds by pressing any key otherwise the device
breaks the connection.
