Copyright © 2011
Seite: 21
Motz-Computer
Service und Vertriebs GmbH
Pfennigbreite 20 – 22
D-37671 Höxter
Germany
Select the PC communication function with
the
⇒
⇐
(right/left) keys
Press the ENTER key
During transmitting or receiving data an arrow
at the MC1100 clock’s display will show the direction of the data transfer. For detailed information
please refer to the pc administration software manual.
You can cancel the pc communication menu by pressing the ‘C’ key.
Particularities during programming the liberation points
If you want to upload liberation points, which are defined by yourself, first you have to delete the
default liberation points, which are setup during initialisation. Otherwise they will be merged to the
existing liberation point table in your MC1100 clock.
MC1100 clock gives you the possibility to upload up to 50 different liberation points.
In order to remove liberation points from the MC1100 clock, you have to run the function „Delete “in
the administration-software, submenu liberation points.
Available in CLUB mode and in HOME via reading unit
Club mode operation
TIPES
can generate printouts of basketed pigeons after basketing or of registered pigeons after a
training flight or a race. You can print via the basketing unit on a serial printer. For official races you
have to use the basketing unit to generate the closing knockoff.
Use the master unit for the printing of „official“ clockrolls!
Make sure that a time receiver is connected to the basketing unit.
Connect your MC1100 clock to the basketing unit.
If you use a serial printer (RS 232 interface) connect it to the printer connector of the basketing unit.
The printer has to be on line; please refer to the printer manual. Presettings for the printer are:
CLUB 06. 18:06:21
PC communication
