Motz-Computer Copyright
2011
Service und Vertriebs GmbH
Pfennigbreite 20 - 22 Seite: 20
D-37671 Höxter
Germany
Make sure that the basketing unit is connected to the club personal computer via the PC interface.
Refer to the master unit (race office unit) manual for detailed setup instructions.
The administration software has to run and the allocation mode has to be selected. Please refer to the
administration software manual.
Connect your MC1100 clock to the basketing unit .
Select the
ALLOCATE
function with the
⇒
⇐
(right/left) keys
Press the ENTER key
This number instantly disappears from the
display to the personal computer when the
„Allocate“ command is entered. There it is
matched in the cross reference table to the
association (metal ring) number preselected by
the PC operator.
If all your pigeons have been allocated disconnect the MC1100 clock from the master unit. The cross
reference table now has to be copied into the control unit. If all pigeons are allocated, press the ‘C’
key to enter the main menu. Select pc communication to upload the allocation table into the MC1100
clock. Please refer to chapter pc communication for data transfer and for more details basketing unit
and pc administration manual.
PC-Communication
Only available in CLUB mode.
Your TIPES
is able to exchange data with an Windows PC. Data transfer is required to
−
Store and restore an allocation table into the MC1100 clock
−
Store fanciers identification data into the MC1100 clock
−
Transfer and delete liberation points
−
Change the PIN secret code (see chapter Delete)
−
Read race results from the MC1100 clock.
Connect your MC1100 clock to the basketing unit. The personal computer has to be connected to the
PC connector at the rear of the basketing unit.
CLUB 06. 18:06:21
Allocate
43680B2C
