CHANGING THE ELECTROLYTE SOLUTION
Depending on your use, the electrolyte may last for up to 1 year. We recommend
changing the electrolyte at least each year to keep the unit operating at peak performance.
When changing the electrolyte, the flux solution and filter material also must be changed.
You will know the electrolyte needs to be changed when:
1. The flame becomes weaker
2. The pressure drops
3. The unit does not generate any gas
You
will
need:
Rubber gloves
Turkey baster or large syringe
Eye protection
1 quart of electrolyte*
Protection for your clothing
Clean filter material*
Drop cloth or safe work area
Fresh flux*
Plastic bucket
Replacement rear check valve*
Plastic funnel
Warm distilled water
*All replacement parts are available through the distributor from whom you purchased
your HydroFlame Torch.
To
change
the
electrolyte:
**CAUTION**
The
electrolyte
is
highly
caustic
and
should always
be
handled
using
protective
equipment
such
as
rubber gloves
and
safety
glasses
or
goggles.
When
handling
the electrolyte
solution,
be
careful
not
to
spill
any.
The electrolyte
may
damage
any
finished
surfaces,
clothing,
etc. Electrolyte
is
highly
corrosive
to
many
metals,
including
copper,
brass,
zinc
and
aluminum,
and
reacts
violently
with acids.
Electrolyte
destroys
human
tissue
on
contact.
It
is odorless
and
colorless.
1. Unplug the unit. Put on protective equipment.
2. Remove all caps.
3. Use the turkey baster to remove all flux and discard in accordance with all applicable
regulations. Wipe the inside of the chamber dry.
4. Remove all dryer filter material and discard. If there is any moisture in the dryer
