1
Strictly ensure that you have read the use instructions before placing the pump in service!
Dear customer,
Congratulation for buying your new device from T.I.P.!
Like all our products, this one, too, was developed using the latest technological knowledge. The device was
manufactured and assembled on the basis of state-of-the-art pump technology using most reliable electrical or
electronic components which ensure a high level of quality and a long life of your new product.
Please read through these operating instructions carefully to make sure that you can fully benefit from all features.
Some explanatory illustrations can be found at the end of these operating instructions.
We hope you will enjoy your new device!
Table of contents
1. General safety information
Please read through these operating instructions carefully and make yourself conversant with the control ele-
ments and the proper use of this product. We shall not be liable in the case of damage caused as a result of the
non-observance of instructions and provisions of the present operating instructions. Any damage caused as a re-
sult of the non-observance of the instructions and regulations contained in the present operating instructions shall
not be covered by the warranty terms. Please keep these operating instructions in a safe place and hand them on
together with the device should you ever dispose of it.
With the contents of this manual unfamiliar people should not use this device.
The pump must not be used by children. The pump may be used by persons with re-
duced physical, sensory or mental capabilities or lack of experience and / or know-
ledge if they have been supervised or instructed in the safe use of the equipment and
have understood the resulting hazards. Children are not allowed to play with the de-
vice. Keep the appliance and its cord out of reach of children.
The pump must not be used when people are in the water.
The pump must be supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30mA.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Notes and instructions with the following symbols require particular attention:
Any non-observance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Any non-observance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
13
Содержание 30310
Страница 50: ...Notizen notes note notas...
Страница 51: ...Notizen notes note notas...
