Tinytag Transit 2, Руководство пользователя

Страница: 7 / 16

7
F E A T U R E S
By default the unit is set to record in minutes mode and in this mode the logger can be
offloaded whilst recording, and current readings can be taken without stopping the
unit. When set to record in second mode the unit has to be stopped before either of
these functions can be performed.
Reading Types
By default, the TG-4080 is set to record the temperature at the end of every logging
interval, but it can also be set to record the minimum and maximum values over a
logging interval as well, or any combination of the three.
Trigger Start
The Tinytag Transit 2 has a trigger start option that allows a user to set up a data
logger as they wish it to record, and then start it remotely at a later time by passing a
magnet across the back of the unit.
The position of the unit’s trigger start switch is indicated
by the
· · · markings on its base. The switch itself is
positioned between the two sets of markings and when
a magnet is passed between them, the green LED on
the front of the logger will light briefly to indicate that the
unit has been activated. Before the logger is “triggered”
the green LED will be flashing once every eight seconds; after it will flash once every
four seconds.