Getting Started
Assembling Std. 42 Track
The track pins allow you to set up the Std. 42 Track on any flat surface.
Connecting the Transformer
Th
tt power supply included with this set provides an easy-to-use, safe power
source for AC-powered trains and accessories.
(see pg. 6)
!
Plug the wire from the transformer into the back of the Z-1000 Controller.
!
Plug in red and black wires from Lighted Lock-on to the corresponding ports on the
back of the Z-1000 Controller.
!
Then plug the transformer into the wall outlet.
!
Unplug when not in use.
e 100-wa
4
Line up and insert the track pins
into the receiving holes on
another section of track. Push
track sections together for tight fit.
STEP
1
1
Tinplate No. 9 Freight Set with Proto-Sound® 2.0
Clip Lighted Lock-on to track as shown in picture.
Then Connect Red wire to the pin on the left of the
light. And then connect the Black wire to the pin
on the right of the light as shown in picture.
STEP
2
2
Red Wire
Black Wire
