Sponsoring members of NACE International, NACE Foundation
QMF-570 105-056
Web: www.tinker-rasor.com
E-mail: [email protected]
- 5 -
M
ODEL
CI-50
View Programming
To conserve battery life, the Model CI-50 has an automatic shutoff of the Display.
To View the program in the instrument, press the View Program button. The
Display will come on for a few seconds, showing the programmed timing. To turn
off the Display, press the View Program button again. If the View Program button
is not used to turn off the Display, the Display will be automatically be turned off in ten (10)
seconds.
NOTE:
When the Display is shown by pressing the View Program button, the
instrument cannot be programmed. The Program button will not work until the
Display is turned off by again pressing the View Program button, or by
automatically shutting off. Once the Display is off, the Program button can be
used.
Stopping / Ending Operation
To stop the operation of the Model CI-50, press the Start / Stop button. The
instrument can also be stopped by moving the Power toggle switch to Off (down).
Maintenance
The Current Interrupter does not require maintenance other than occasional battery
replacement. Normal care in use and storage will give many years of trouble-free service.
However, should the Current Interrupter require factory service, ship (freight prepaid) to:
Tinker & Rasor
ATTN: Repair
2828 FM 758
New Braunfels
,
TX
78130
USA
106-185
CORROSION MITIGATION INSTRUMENTATION
2828 FM 758, NEW BRAUNFELS, TX 78130 TEL: (830) 253-5621