© Tinius Olsen Ltd
L-Series Manual – Issue 1
Page 12 of 31
3.2.4. Remove Machine
The machine is now in a position to be removed from the case. Position the fork lift
truck, in front of the case.
Arrange the forks of the truck so that they can fit between the side covers of the
machine and below the crosshead. Slowly move the fork lift truck towards the machine
ensuring the forks do not hit the machine side covers. Raise the forks to lift the machine
so that its base is clear of the case, then remove the machine form the case.
Note
To stop damage to the paint work on the machines crosshead place strips of
cardboard on the forks before lifting.
The diagram below indicates machine lifting positions.
If a fork lift truck is not available the machine may removed using a hoist and straps.
The lifting positions are the same however the top of the case will need to be removed.
The diagram below indicates the machine removed from its case.
