background image

                   

Installation/Operation

 

Manual

 

Pucada Tech

 

    ~ 4 ~                                  www.pucada.com 

 

2. 

INTRODUCTION 

 

The 

TINCO TECH

 continuous flow gas water heater series are designed and manufactured in 

accordance with the customers’ requirement for energy efficiency, safety, comfort, and 

convenience.

 

 

Features: 

 Condensing and non-condensing models are available 

 Outdoor and co-axial flue indoor models are available 

 Domestic and Commercial models are available   

 Cascade connection available 

 Max. 50

hot water delivery models (complied with Water Mark) are available 

 Precision thermostatic c/-2°C   

 Gas valve + control PCB designed and manufactured in house 

 Digital electronic ignition 

 LCD temperature control pad 

 Error code system 

 Module designed for easy maintenance   

 Oxygen free copper heat exchanger 

 By pass valve 

 Step motor water flow controller   

 

Safety Functions:   

 Anti-frost detection ( ECO30i / ECO30e / ECO24e / AQUA 28e / AQUA28i series )   

 Flame out detection 

 Over voltage detection 

 Abnormal water pressure detection 

 Multiple safety temperature detection 

 Over heat detection 

 Power failure detection 

 Block flue detection 

 BLDC blower degradation detection 

 

Before installing this appliance, please carefully check that all packing materials have been 

removed and that the appliance is correct for the gas supply to which it is to be connected. 

 

 

 

Содержание AQUA28e Series




























































Отзывы: