ƣ
Charging Your iPod
Note: Please make sure you are using the correct insert for your iPod (see Install iPod Insert) and that it is properly docked
into the Ti700. Failure to do so may damage your iPod or the connector.
1. While your iPod is docked in the unit and the unit is connected to AC power, it recharges until fully charged. Note that
other non-docking iPods will NOT charge.
Listening to Your iPod
1. Dock an already playing iPod, the Ti700 will automatically turn on and you will hear the music playing from your iPod.
Note: If the playing song/music loudness on the iPod itself is too low, Ti-700 may not detect the iPod is in play mode.
Press the
iPod Play/Pause Button
on the Ti700 or remote control twice to play it.
2. When the iPod is docked and in standby mode, press the
iPod Play/Pause Button
on the Ti700 or remote control
to play it. The
iPod Icon
will appear on the display, showing iPod playing mode.
3. Press
the
iPod Play/Pause Button
again to pause play; press again to resume it.
4. Press
the
and
Volume– Button
on the Ti700 or remote control to adjust the system volume.
5. Press
<<
or
>> Button
on the Ti700 or remote control to go to the previous or next track. Press and hold while a
track is playing for high speed forward or reverse music search of the current track.
6. To turn off the unit, press the
Alarm Reset/Power On/Off Button
on the Ti700 or remote control to turn it off. The
iPod will continue charging while in the dock.
Listening to non-docking iPod or other portable audio devices
If you are using an iPod without a docking port or another MP3 player or other portable audio device, you can still play it
through the Ti700 via the Line-in Jack.
NOTE: you cannot charge a device through the line-in jack.
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your device and the other end of
the patch cord into the Ti700
Line-in Jack
, located on the back of the unit.
2. Press
iPod Play/Pause Button
on the Ti700 or remote to turn the Ti700 on. The
iPod Icon
will appear on the top of
the display, indicating Line-in playing mode.
3. Turn on and play your device.
4. Press
the
and
Volume– Button
on the right of the Ti700 or use the remote control to adjust the system
volume. You may need to adjust your device volume, too.
5. To turn off the unit, press the
Alarm Reset/Power On/Off Button
on the Ti700 or remote control to turn it off. Please
remember to turn off your device, too.
3
iPod Play/Pause Button
Alarm Reset/
Power On/Off Button
Button
Button
Button
Preset Button
Volume_ Button
Radio Button
Snooze/Dimmer Button
Radio Band Indicator
Display
Remote Control
PM Indicator
Alarm 1 Icon
DST Icon
Alarm 2 Icon
Time Display
Radio Frequency/
Date/Alarm Time Display
iPod Icon
Sleep icon
Main Battery Low icon
Radio Indicator
Selects iPod and plays track. In play mode, press to pause
Turns Ti700 ON or OFF , resets alarm when alarm is sounding
Skip to previous or next track when iPod is playing, or
HOLD to scan current playing track.
Raises volume level
Lowers volume level
Selects radio preset station
Turns on radio/switches radio bands
Snooze mode when alarm sounds, otherwise dims display
<<