A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire
hazards. Please read all the safety and operating instructions carefully before installation and use. Keep these instructions handy for future
reference. Take special note, adhere to all warning, and always follow the instructions on the unit and in the instruction and service manuals.
1.
Water and Moisture
– The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
2.
Ventilation
– The unit should be situated so that its location or position does not interfere with it’s proper ventilation. For example, it
should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
3.
Heat
– The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
4.
Power Sources
– The unit should be connected to a power supply only of the type described in the operating instructions or as marked
on the appliance itself.
5.
Power-cord Protection
– Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet.
6.
Cleaning
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
7.
Non-Use Periods
– The power cord of the unit should be unplugged from the outlet when it is to be left unused for a long period of time.
8.
Object and Liquid Entry
– Care should be taken so that objects do not fall and liquids are not spilled into an enclosure through
openings.
9.
Attachments
– Do not use attachments not recommended by the product manufacturer as they may cause hazards.
10.
Lightning
– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
11.
Overloading
– Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
12.
Damage Require Service
– The unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit does not appear to operate normally or exhibits a marked change in performance.
13.
Servicing
– The user should not attempt to service the unit beyond that described in the user’s operating instructions. All other servicing
should be referred to qualified service personnel.
14.
Safety Check
– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
15.
Antenna
– Do not connect to an external antenna.
For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491.
1
AC adaptor isn’t plugged into a wall outlet
or the connector is not plugged into the
power supply jack on the back of the unit
Plug the AC adaptor into a wall outlet and plug the
connector into the supply jack on the unit
Wall outlet is not functioning.
Plug another device into the same outlet to confirm the
outlet is working
Using no or wrong iPod insert
Make sure the dock insert is the proper fit for your iPod
iPod not installed properly
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Battery Low icon
always flashing
Batteries are weak
Replace with new batteries
Check to make sure the polarity ( + and – ends) matches
the diagram in the battery compartment
iPod does not
respond to the unit
iPod is not installed properly
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Your iPod software is too old
Upgrade software on your iPod. For details visit
http://www.apple.com/ipod/download
iPod is locked up
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
Symptom Possible Problem Solution
Unit doesn’t respond
(no power)
iPod does not dock
properly
Batteries were not installed properly
Trouble Shooting