9
Operating the Alarms
Setting the Radio Alarm
1. Press the
K
Alarm Set Button
once to set the radio alarm. The display will flash and show the radio alarm setting.
2. Press the
1
<< or
M
>> Button
to set the radio alarm time. Hold either button for a few seconds so as to advance
or reverse the alarm time rapidly. Set the correct AM/PM time, shown by the PM indicator.
3. While the display is still flashing, press the
L
7-5-2 Button
repeatedly until your desired alarm days are shown on the
bottom of display.
Note: The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Be sure that you have set
the correct day and date as shown in the "Setting the Calendar".
4. See the Listening and Sleeping to the Radio for instructions on selecting radio station and volume.
5. Press
K
Alarm Set Button
twice, or wait few seconds to return to the standard clock display. The Radio Alarm Indicator
will appear, showing that the radio alarm is set
Setting the Buzzer Alarm
1. Press the
K
Alarm Set Button
twice to set the buzzer alarm. The display will flash and show the buzzer alarm setting.
2. Press the
1
<< or
M
>> Button
Button to set the buzzer alarm time. Hold either button for a few seconds so as to
advance or reverse the alarm time rapidly. Set the correct AM/PM time, shown by the PM indicator.
3. While the display is still flashing, press the
L
7-5-2 Button
repeatedly until your desired alarm days are shown on the
bottom of display.
Note: The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Be sure that you have set
the correct day and date as shown in the "
Setting the Calendar
".
4. Press
K
Alarm Set Button
once or wait few seconds to return to the standard clock display. The
Buzzer Alarm
Indicator
will appear, showing that the buzzer alarm is set.
Checking Your Alarm Time Settings
To check either alarm setting, press RADIO or BUZZER Alarm Button twice to show the settings for a few seconds. After
you have checked the setting,
be sure that the Alarm Indicator still appears on the display
.
Turning Off the Alarms
1. After the alarm sounds, press the
6
Off/Alarm Reset Button
to turn off the alarm while still maintaining the programmed
7-5-2 Advance Alarm settings. To turn off an alarm and press its Alarm Button so that its Alarm Indicator no longer
appears on the display.
2. If the
6
Off/Alarm Reset Button
is not pressed, the alarm will sound for an hour before stopping. As long as an
indicator appears on the display, the alarm will sound according to the 7-5-2 Advance Alarm settings.
3. To use the snooze feature, press the
7
Snooze/Dimmer Button
when alarm sounds. The alarm will stop for about
nine minutes before sounding again. This can be repeated during the one-hour snooze cycle.