Setting the Clock and Calendar
Setting the clock
1. Press and hold the
3
Time Set Button
until the time display begins flashing.
2. Press the
1
<< or
M
>> Button
to adjust to correct time. Holding a button for a few seconds will advance or reverse the time
rapidly.
3. Remember to set the correct AM or PM. The
PM Indicator
is located on the left side of the time digits.
4. Press the
3
Time Set Button
again or wait about ten seconds for the unit to beep twice and the display to return to normal display
mode.
Setting the Calendar
1. It is important to set the correct date in order to use the 7-5-2 Alarm settings. Press and hold the
2
Date Set Button
until the
display begins flashing and the last two digits of the year replace the time in the display.
2. The date, month, and year are each set using a different button. To set the date, press the
1
<< Button
. To set the month, press
the
M
>> Button
. To set the year, press the
L
7-5-2 Button
. (These buttons will only advance the date forward.) The clock features
a 99-year calendar that automatically programs the correct day of the week for the date set.
3. After setting the calendar, press the
2
Date Set Button
or wait about ten seconds to return to the normal display mode.
Daylight-Saving Time and Leap Years
This unit will automatically adjust the clock at the beginning and end of daylight-saving time each year. It will also automatically adjust
the month/day display for leap years.
This clock automatically advances one hour at the start of daylight-saving time on the first Sunday of April, and automatically moves
back one hour at the end of daylight-saving time on the last Sunday of October. If you live in an area that does not observe daylight-
saving time, it will be necessary for you to manually adjust the clock
back
one hour at the beginning and
forward
one hour at the end
of the daylight-saving period.
Adjusting the Display Backlight
This clock radio features a "rainbow-like" clock display, providing a spectrum of color. When the clock radio is plugged in, the color of
the display will constantly change from one color to another. When the desired color appears on the display, press the
5
Color Select
Button
once to select that color. The display will stop changing colors.
You may change the display color anytime by pressing the
5
Color Select Button
to re-activate the color variation. Press the button
again when the desired color appears on the display.
Note: To adjust the brightness to dim, medium or bright setting, press the
7
Snooze/Dimmer Bar
repeatedly until the desired brightness
is reached.
7