A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep these
instructions handy for future reference. Take special note, adhere to all warnings, and always follow the instruction on the unit
and in the instructions and service manuals.
1.
Warning for Battery
– Batteries shall not be exposed to excessive heat such as sunshine, fire.
2.
Water and Moisture
- The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
3.
Ventilation
- The unit should be situated so that its location or position does not interfere with it’s proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it
should not be placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the
ventilation openings.
4.
Heat
- The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
5.
Power Sources
- The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
6.
Grounding or Polarization
- This product is equipped with a polarized alternating-current line plug (a plug having one
blade wider than the other). As a safety feature this plug will fit into the power outlet only one way. If you are unable to fit
the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of your polarized plug.
7.
Power-Cord Protection
- Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where
it is plugged into an AC outlet.
8.
Cleaning
- The unit should be cleaned only as recommended by the manufacturer. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
9.
Non-Use Periods
— the power cord of the unit should be unplugged from the outlet when it is to be left unused for a
long period of time.
10.
Objects and Liquid Entry
- Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
11.
Attachments
– Do not use attachments not recommended by the product manufacturer as they may cause hazards.
12.
Lightning
– For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
13.
Overloading
– Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
14.
Damage Require Service
- The unit should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain or water.
D. The unit has been dropped or the enclosure damaged.
E. The unit does not appear to operate normally or exhibits a marked change in performance.
15.
Antenna
- Do not connect to an external antenna.
16.
Servicing
- The user should not attempt to service the unit beyond that described in the user’s operating instructions. All
other servicing should be referred to qualified service personnel. If you have any questions, call SDI Technologies Inc.
Timex Audio Products Division Customer Service, 1-800-888-4491.
17.
Safety Check
— Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.