1. Set the
Projection Switch
located on the right side of the unit to
Time
to project the time, to
Time/Alarm
to project both the time and the earliest set alarm time or to
Off
to turn the projection function off.
2. Tilt the projector arm to aim the projected display as needed for best viewing. Adjust the focus by turning the
Focus Dial
until the image is sharp. To flip the the projected image vertically, press the
Flip Image Button
.
Using the Projector Function
9
Back Light Dimmer
During normal operation, press the
Snooze/Dimmer Button
to adjust the display brightness.
Snooze Operation
1. Press and hold the
Snooze/Dimmer Button
to adjust snooze timer from 1 to 30 minutes.
2. After the alarm sounds, press the
Snooze/Dimmer Button
. The alarm will go off and will come on again after
the set snooze time.
You may repeat this cycle several times during the 1 hour alarm cycle
.
