Timex Ironman Triathlon, Инструкция по эксплуатации

Страница: 14 / 18

Options Mode
The watch has a variety of options
designed to make the Speed and
Distance System more useful.
In Options Mode, press
SPEED/DISTANCE DISPLAY to
review the option settings.
To adjust non-numeric options (like
On/Off, Units, Speed or Pace, etc.),
you can simply press
START/STOP to choose the correct setting.
To change numeric settings:
1. Press and hold
SPLIT/RESET/SET to start the set sequence. The value
(or some part of it) will begin to flash.
2. Press START/STOP to set the flashing value, and use MODE to select the
next digit. Note that some options only have one setting or digit, so
MODE does nothing.
3. When you are done setting, press SPLIT/RESET/SET to save the changes
and exit setting.
SMOOTHING – This feature makes pace and speed values easier to read
while using the watch by “smoothing” out any small variations in speed.
You might want to enable this feature if you are viewing pace information
and the displayed numbers appear too “jumpy.” Smoothing has no effect
on the accuracy of the data displayed, nor any effect on the distance
accumulated.
24 25
UNITS – Choose to have the watch display distance and pace based in
Miles or Kilometers (KM).
ZONE ALERTS (Speed or Pace) – This feature is only available on the 100-
Lap model.
ZONE ALERTS will sound if you are outside a zone defined by a minimum
and maximum value for speed or pace (one or the other, not both
simultaneously). You may also turn this feature off.
DISTANCE ALERTS – This Feature is only available on the 100-Lap model.
DISTANCE ALERTS allow you to have the watch alert you when you have
traveled a set distance value. Note that this alert will sound only if the
Chronograph is running and the watch is receiving speed and distance
information form the Transceiver. The alert repeats until it is turned off.
INDIGLO ® night-light
Press INDIGLO button to activate light. Patented (U.S. Patent Numbers
4,527,096 and 4,775,964) electroluminescent technology used in the
INDIGLO night-light illuminates entire watch face at night and in low light
conditions. Press and hold
INDIGLO button for 3 seconds, until watch
beeps, to activate NIGHT-MODE®. (U.S. Patent Number 4,912,688). Once
activated, any button pushed will cause the INDIGLO night-light to stay on
for 3 seconds. NIGHT-MODE will stay activated for 3 hours or until you
deactivate it by pressing and holding
INDIGLO button again for 3 seconds.