1
ENGLISH 04K-096000-02
EXTENDED WARRANTY
Available in U.S. only.
Extend your warranty for an additional 4 years from date
of purchase for $5… You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours… Payment must be made
within 30 days of purchase… Name, address, telephone number, purchase date,
and 5-digit model number required… You can also mail a check for $5 to: Timex
Extended Warranty, P…O… Box 1676, Dept… EF, Little Rock, AR 72203…
Please read instructions carefully to understand how to operate your Timex
®
watch…
FEATURES AND BASIC OPERATIONS
1… LCD Analog (Hands) and Digital Timekeeping with Hours, Minutes,
Seconds – AM/PM/24-Hour Format
2… Daily Alarm and Hourly Chime
3… 24-Hour Stopwatch with Split time
4… 60-Minute Countdown Timer
5… Dual Time (2nd Time Zone)
LIGHT
START/STOP
MODE
LAP/RESET
Button functions shown
TIME
To set Time and Date
1… Press
MODE
repeatedly until the Time is shown with the Seconds flashing…
2… Press
LAP/RESET
to set Seconds to zero…
NOTE:
If Seconds are greater than 30, the Minutes will increase by one…
3… Press
START/STOP
to set Minutes, as indicated by its flashing… Press
LAP/RESET
to advance the Minutes setting… Press and hold to increment
quickly…
4… Press
START/STOP
to set Hours, as indicated by its flashing… Press
LAP/RESET
to advance the Hours setting to AM or PM… Press and hold to
increment quickly…
NOTE:
There is ONLY an indicator for PM hours…
5… Press
START/STOP
to set the Date (01-31), as indicated by its flashing…
Press
LAP/RESET
to advance the Date setting… Press and hold to
increment quickly…
6… Press
START/STOP
to set the Month number (01-12), as indicated by its
flashing… Press
LAP/RESET
to advance the Month setting… Press and hold
to increment quickly…
7… Press
START/STOP
to set the Day setting (SUN-SAT), as indicated by its
flashing… Press
LAP/RESET
to advance the Day setting… Press and hold to
increment quickly…
8… Press
MODE
to exit Time Set…
9… To switch from AM/PM to 24-Hour time format, press and hold
START/
STOP
for 4 seconds… Press and hold
START/STOP
for 4 seconds to
reverse the format change…
NOTE:
A “24HR” indicator in the bottom right corner of the display confirms
the change… There is ONLY an indicator for PM hours…
DUAL TIME
To set the time for a Second Time Zone – shown on the LCD Analog watch
face
1… Press
MODE
until the indicator is next to the “DUAL T” on the display…
2… Press
START/STOP
… The Hour Hand on the watch face can be seen
flashing…
3… Press
LAP/RESET
to advance the Hour Hand around the watch face
setting to AM or PM… Press and hold to increment quickly…
NOTE:
There is ONLY an indicator for PM hours…
4… Press
START/STOP
… The Minute Hand on the watch face can be seen
flashing…
5… Press
LAP/RESET
to advance the Minute Hand around the watch face…
Press and hold to increment quickly…
6… Press
START/STOP
to exit Dual Time Set, and the Second Hand will
appear on the watch face…
NOTE:
In Dual Time mode, the AM/PM indication is tied to the Analog time…
ALARM
To turn on/off the Daily Alarm, or to turn on/off the Hourly Chime
1… Press
MODE
until the indicator is next to the “ALARM” on the display…
NOTE:
The alarm setting is tied to the primary time zone…
2… Press
START/STOP
and
LAP/RESET
simultaneously and repeatedly to
enable the Alarm ( ), enable the Chime ( ), disable the Alarm, and disable
the Chime…
NOTE:
You can turn the Alarm on/off without changing the Chime setting by
pressing
LAP/RESET
…
To set a Daily Alarm – shown on the LCD Analog watch face
1… Press
MODE
until the indicator is next to the “ALARM” on the display…
NOTE:
The alarm setting is tied to the primary time zone
2… Press
START/STOP
… The Hour Hand on the watch face can be seen
flashing…
3… Press
LAP/RESET
to advance the Hour Hand around the watch face
setting to AM or PM… Press and hold to increment quickly…
NOTE:
There is ONLY an indicator for PM hours…
4… Press
START/STOP
… The Minute Hand on the watch face can be seen
flashing…
5… Press
LAP/RESET
to advance the Minute Hand around the watch face…
Press and hold to increment quickly…
6… Press
START/STOP
to exit Alarm Set mode…
7… When the alarm sounds, press ANY button to silence the alert, or it will stop
after 20 seconds…
NOTE:
The alarm will sound the next day at the same time unless you go
into Alarm Mode and press
LAP/RESET
to turn it off
TIMER
To set a countdown for up to 60 minutes – shown on the LCD Analog watch
face
1… Press
MODE
until the indicator is next to the “TIMER” on the display… If the
Timer shows any previous setting, the indicator will flash…
2… Press
LAP/RESET
repeatedly to increase the number of Minutes for the
countdown…
NOTE:
If you go past the desired number of minutes, you will have to
continue to press
LAP/RESET
to wrap around the setting display…
To use the countdown timer – shown on the LCD Analog watch face
1… Press
MODE
until the indicator is next to the “TIMER” on the display… If the
Timer shows any previous setting, the indicator will flash…
NOTE:
If no setting is shown, press
LAP/RESET
to restore the previously
set countdown (or refer to the Timer Set instructions)…
2… Press
START/STOP
to begin the countdown… The watch face will show
Seconds counting down along its outer edge…
3… Press
START/STOP
to pause the timer…
4… Press
START/STOP
to resume the countdown, or press
LAP/RESET
to
reset the timer to its previous setting…
5… When the countdown ends, the alert will sound for 5 seconds, or press ANY
button to silence it…
NOTE:
The alert will sound even if you are not in TIMER mode…
STOPWATCH
Use this function for recording elapsed time up to 24 hours…
1… Press
MODE
until the indicator is next to the “STOP” on the display…
NOTE:
The current time of day is shown on the LCD Analog watch face…
2… Press
START/STOP
to start the stopwatch… It will be shown in the lower
digital display…
