Timewave PK-232SC, Руководство по установке оборудования

Страница: 29 / 38

29
____ 17) Install the new top housing on the PK-232. Make sure
the connectors on the PK-232 and SC boards line up with
the holes on the new top housing back panel. You can
make slight position adjustments by loosening the screws
on the bottom and top of the standoffs on the PK-232 main
and SC boards. After you have made a re-alignment, be
sure to tighten all screws. Also check the various cables
that run from the back housing to be sure that none are
pinched between the housing and other parts of the PK-
232.
____ 18) Install the two hex jack screws on the DB-9 connector
on the SC board.
____ 19) Install the new top housing six retaining screws
____ 20) Install all external cables.