w w w . i - t i m e t e c . c o m
TimeTec Panic Button
INSTALLATION METHODS
INSTRUCTION FOR ADHESIVE INSTALLATION:
1. Clean the adhesive surface area using a detergent to remove dust,
grease, and other dirty stains on the surface.
. Make sure the surface is dry before sticking the item onto the sur-
face
. Remove the M adhesive release liner with care. Do not press your
finger against the M adhesive sticky surface while removing the
release liner. While pasting, apply adequate pressure to the adhe-
sive surface for a longer-lasting adhesive result.
Remark:
The bonding temperature for 3M adhesive is best between 12-38 Celcius. Please avoid
carrying out this process in any environment that is below 10 Celcius.
