SINGLE FREQ
In this mode, T100+ can display the measured
data in any of the following four
representations.
You may switch cyclically through these
representations with the MODE key.
•SWR
•IMPEDANCE (SERIES)
•IMPEDANCE (PARALLEL)
•S11 (RECTANGULAR & POLAR)
SWR
This mode displays the
Standing Wave Ratio in
large font for easy
reading. It also
displays the impedance
(Z) for your
reference.
IMPEDANCE
(SERIES)
This mode displays the
impedance seen from
the test port. The
impedance is resolved
into the real
(resistive)part and
imaginary (reactive)
part connected in
series. The
corresponding
inductance or
capacitance is also
timestechnology.com.hk
7
