Timeless Wings SLINGSBY DART 17, Руководство по монтажу

Страница: 3 / 19

3
FUSELAGE CONSTRUCTION
1. Mark the position of formers on the fuselage sides, then pin the right fuselage side to
the building board (50mm thick Styrofoam insulation with baking paper on top works
well as a building board). Note that the left and right fuselage sides are different
because of the staggered position of the pushrod exits.
2. Make up the noseblock assembly in two halves, by gluing 3 LHS pieces together (shown
in red), and 3 RHS together (shown in green). The location of the motor cut-out is now
drawn on front and back (refer to plan for location) then removed using a coping saw.
The two halves can then be glued together, then glued to the fuselage RHS.