Timeless Wings SLINGSBY DART 17, Руководство по монтажу

Страница: 16 / 19

16
FITOUT
19. Decide how you wish to hinge the ailerons; then cut out from the wing and bevel to
suit. The prototype used clear tape, top-hinged. The rudder can be hinged according to
preference. Fit the aileron servo attachments of choice, if not already done earlier.
The prototype was covered with HobbyKing iron-on covering, which goes on easily and
gives a great result. HXT900 servos are fitted side by side in the prototype. Smaller
servos would be fine too. Fit control horns and associated connectors etc.