Connect The Cable
Connect the USB cable to a free USB port on the back of an LCD
display or Network Clock. The keypad can also connect directly to a
USB port on the back of a TimeIPS system.
If needed, a USB extension or USB hub can be used to extend the
cable length. Never use an extension cable if the total cable length
will exceed 10 feet. (USB HID devices are limited to 3M cable
length.)
Note that it takes 10-15 seconds before the keypad will respond if
plugged into a running TimeIPS system. There is no need to
shutdown the system to attach or detach the keypad.
TimeIPS
http://support.timeips.com 316.264.1600
Page 5
USB
Connector
DB-9
Connector
Parallel
Port
Connector
Keypad
USB
Connect to an LCD
Display, Network
Clock or directly to
a TimeIPS system
