Configure Badge Numbers
The employee ID number is set in the “ID / Badge” field by going to
“Administration” > “Employee Management” > “Employees” and selecting the
employee on the list by clicking the “+” next to their name. You will see that the
“ID / Badge” field is set to a default number (usually a sequence starting with 1000,
or the number entered on the guided setup). This auto-assigned ID / Badge Number
can be changed as needed.
Prior to setting up any new employees, please consider if the default Employee ID
Number of 1000 assigned to the administrative employee is how you want to begin
your Employee ID Number sequence. If not, please consider the following:
Changing the administrative employee's ID number or setting up a new
employee's Individual Employee ID number can be handled 2 different ways:
1. Accept the automatically assigned sequential ID / Badge Number that the system
will give to each new employee.
2. Assign a unique number in the ID / Badge Number field as needed. If you want
each employee to have their own custom number (such as their driver's license
number or Social Security Number), you'll have to override the auto-generated
employee ID number generated by the system on each employee.
Adjusting the Volume and Contrast
If you find a need to adjust the volume of the speaker or the contrast of the display
you can do so by using the system menu. The volume and contrast can only be
changed by an administrative user.
Access the system menu as described on page 10. Navigate to Set Volume and/or
Set Contrast and press Enter. Adjust the levels of each to suit your environment by
altering them up or down as needed.
Note: At normal temperatures, contrast
adjustment should not be needed and the change with “Contrast Up” or “Contrast
Down” will be slight.
TimeIPS
http://support.timeips.com 316.264.1600
Page 13
>Set Volume
Set Contrast
Test Relays
Remote Service
Set Volume
>Volume Up
Volume Down
Set Contrast
>Contrast Up
Contrast Down
