Timeguard Weathersafe Extreme WXT103N, Инструкция по установке и эксплуатации

Страница: 3 / 16

2
• Check that the total load on the circuit including when this switch,
socket, spur or bell push unit is fitted does not exceed the rating of
the circuit cable, fuse or circuit breaker.
• Electricity can be dangerous; the use of an RCD should not be
regarded as a substitute for basic electrical safety precautions.
• Always test the RCD before use. If the test procedure is not
completed satisfactory or an appliance continues to trip the RCD
seek professional advice and switch off the appliance.
• To clean, use a clean dry cloth only. Do NOT use any liquid cleaners.
• During use warming of the enclosure is normal.
Wiring tests – Important (WXT104NP, WXT204NP & WXT205NP)
• Remove this product from the circuit if carrying out tests (as
described in the IEE Wiring Regulations) for earth loop impedance,
prospective short circuit current and insulation resistance.
• Use the enclosed warning label to ensure this is carried out.
3. Technical Specifications
General
• Voltage: 230V AC 50Hz
• IP Rating: IP66
• All products in the range comply with the low voltage directive
2014/35/EU and where relevant the EMC directive 2014/30/EU
and ROHS directive 2011/65/EU & 2015/863.
• CE Compliant