Visual I.D.
Item
Sensor Instructions Wood Self-tapping IR-10
screw
screw
(optional
Ø4 x
Ø3 x
purchase)
25.4mm
10mm
Quantity
1 1 2 2
Please disconnect power completely and read the
entire instruction manual carefully before installation.
3.1 Select the required location
3.1.1 Sensor adjustment
Fig. 2 shows the way coverage alters with ceiling height and with
adjustments of the METER dial setting.
Section 4.2.3 shows how tilting and rotating the sensor can produce
different fields of coverage.
Ceiling Height (H)
Detection Coverage Diameter (D)
with METER on +
2m
7m
2.5m
7m
3m
10m
3.5m
12m
4m
12m
4.5m
12m
If the METER control is turned to - the coverage diameter is substantially
reduced.
We do not recommend the use of these units with ceiling heights
greater than 4.5m.
3.1.2 Helpful tips for installation
As the sensor responds to temperature change or moving heat sources,
please avoid the following conditions:
• Avoid highly reflective surfaces within the detection range.
• Avoid movable objects e.g. curtains and plants in the detection range
(these may cause erronious detections when moved by air flow from
fans or air conditioner).
• Avoid heat sources (e.g. heating vents, radiators, air conditioners and
filament lamps) in detection range.
• Avoid fans drawing air across the sensor lens.
3.2 Wiring
3.2.1 Lighting and HVAC are controlled by one PDSM362 (see Fig.3).
1
Package Contents
2
Product Description
3
Installation and Wiring
Technical Specifications
Rated Voltage:
230V~ ±10% 50Hz
Loads
PDSM362 (2 channels):
Load I ( L
È
) for Lighting: µ (contact
seperation)
Incandescent lamp: max. 2000W
Mains halogen lamp: max. 1000W
LV halogen lamp: max. 600VA
Fluorescent lamp: max. 900VA/100µF
Load II (D1-D2) for HVAC:
Max. 5A (cosØ =1) 250VAC or 30VDC
Max: 1/10HP (73W)
PDSM361 (1 channel):
Load I ( L
È
) for Lighting: µ (contact
seperation)
Incandescent lamp: max. 2000W
Mains halogen lamp: max. 1000W
LV halogen lamp: max. 600VA
Fluorescent lamp: max. 900VA/100µF
Timer Adjustment
PDFM362:
(constant adjustment)
TIME1 (for lighting):
Adjustable from 5sec to 20min
(continuously
adjustable)
TIME2 (for HVAC):
Adjustable from 10sec to 60min
(continuously
adjustable)
PDFM361:
TIME: Adjustable from 5sec to 20min
(continuously
adjustable)
LUX (light level)
Adjustable from 10LUX to 2000LUX
Adjustment
(continuously
adjustable)
Max. Detection Coverage
360º cone shape from ceiling height of
2.5m giving 7m dia. coverage at floor
level (for affect of ceiling height on
coverage see section 3.1.1)
Conforms To
EC Directives
All procedures indicated in this manual must be
carried out by a professional installer.
METER
Adjustment
Adjustable continuously from
+ giving maximum detection
coverage at floor level to - giving a
substantially reduced detection
coverage at floor level
Operating Temperature
0ºC to +45ºC
Environmental Protection
Class II, IP40
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 1
Side View
Top View
(showing individual
beam pattern at floor level)
3.2.2 Lighting is controlled by two PDSM362’s to enlarge detection
range (see Fig.4).
3.2.3 Lighting is controlled by a PDSM361 (see Fig. 5).
Fig. 8
Fig. 7
Surface Mount
Presence Detector
PDSM362 / PDSM361
Instructions
2.1 Features
The PDSM362 / PDSM361 controller is a ceiling surface mount presence
detector for indoor applications in commercial and domestic locations.
PDSM361 covers lighting applications only, whereas PDSM362 can
control lighting and HVAC (heating, ventilating and air conditioning)
applications.
Adjustment of Time and LUX values can be made either by the dial
controls on the sensor body or by the IR-10 Infrared remote control.
• PDSM362 has two relays for outputs load I and load II:
load I is for lighting control and load II has voltage free contacts for
HVAC control which operate at all LUX (light) levels.
• The sensor has a very high density of sensitive beams covering the
detection area. These are evenly distributed ensuring no dead spots
and detection of the smallest movements.
• Either side or bottom cable entry.
• Built-in red LED in sensor giving confirmation of remote control
settings and easy test operation.
2.2 Dimensions (see Fig.1)
Models PDSM362 / PDSM361
3.3 Installation procedure
3.3.1 Insert large flat blade screwdriver into the groove as shown each
side in turn and twist (see Fig. 6) to remove outer cover.
3.3.2 To separate bottom case from lens body force a small flat blade
screwdriver into the hidden gap shown partially exposed in Fig. 7 then
push screwdriver in towards centre and lever bottom case assembly
away from lens body pins.
3.3.3 Remove cardboard and screws used to assemble and fix the sensor
(see Fig. 8).
PDSM361_362_Instructions_2.indd 1
PDSM361_362_Instructions_2.indd 1
14/5/08 09:06:01
14/5/08 09:06:01
