1
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the PIR sensor
is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this PIR sensor and install in accordance with the
current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this PIR sensor is fitted
does not exceed the rating of the circuit cable, fuse or circuit breaker.
3. Technical Specifications
• 230V AC 50 Hz
• This PIR is of Class ll Construction and must not be earthed
• Motion Detection Range:
Up to 12 metres at a 2.5m mounting height
• Detection Angle:
200°
• Maximum Switching Load:
2300W Halogen Lighting
500W Fluorescent Lighting
140W LED Lighting
150W Discharge Lighting (SON, HQI)
• Time ON Adjustment:
5 seconds to 18 minutes
• Dusk Level Adjustment:
Day and Night or Night time only operation
• IP55 Rated suitable for restricted external applications
• CE Compliant
• Manual Override
• Multiple PIR Sensor Switching: A maximum of 8 MTLW3000 PIR sensors
can be wired in parallel, to enable any detector
to turn ON all the lights connected (The total load
must not exceed the lamp rating of a single
MTLW3000 unit).
